Edimax EW-7722UnD Bedienungsanleitung PDF herunterladen (Seite 29)

wireless device you wish to connect. When you‟re adding a profile

from an existing access point or wireless device, authentication type

will be selected automatically, and please do not change it.

If you select „LEAP‟, you‟ll be prompted to input LEAD specific

settings:

Please input LEAP identity, password, domain name, and select

encryption type. You can check „Show Password‟ box so the

password you inputted will be displayed as you type, but not replace

by asterisk.

Encryption

Select the encryption type of the wireless access point or wireless

device you wish to connect. When you‟re adding a profile from an

existing access point or wireless device, the encryption type will be

selected automatically, and please do not modify it.

WPA

Preshared

Key

Input WPA preshared key here. If encryption is not enabled, or you

select „WEP‟ as encryption type, this field will be disabled and

grayed out.

WEP Key

You can select key type (Hexadecimal or ASCII) and input WEP key

here. If encryption is not enabled, or you select „WPA‟ as encryption

type, this field will be disabled and grayed out. You can set up to 4

WEP keys here.

There are two types of WEP key: Hexadecimal and ASCII. For

Hexadecimal key, you can input number 0-9 and alphabet a-f; for

example, „001122aabbcc‟; For ASCII key, you can input number 0-9

and alphabet a-z; for example, mywepkey12345.

The length of WEP key depends on the type of WEP key you

selected. You can input 10 or 26 hexadecimal characters and 5 or 13

ASCII characters as WEP key.

Show

Password

Check this box and all passphrases or security keys you inputted will

be displayed as you type, but not replace your input with asterisk.

Use 802.1x

If the access point you wish to connect requires 802.1x

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 79 80

Keine Kommentare

Edimax EW-7722UnD Bedienungsanleitung Seite 29