Edimax EW-7722UTN V2 Bedienungsanleitung Seite 1

EW-7722UTn V2 EW-7612UAn V2 User Manual 10-2011 / v1.0

5 Insert the USB wireless network card into an empty USB 2.0 port of your computer when computer is switched on . EW-7722UTn V2 EW-7612UAn V2 Ne

6 The following message will appear on your computer, click „Cancel‟ Software Installation This wizard can be run in Windows XP/Vista/7. You c

7 I. Install the Driver and Utility If you prefer the traditional setup procedure. Please insert the installation CD to your CD-ROM Drive, and clic

8 Click “Next” to go to the next step.

9 Now you‟ll see the following message, please click „Install‟ to begin the installation. The system starts to install the driver and utility. Cl

10 II. Connect to Wireless Access Point A. To start configuring the adapter, double click the icon in the system tray or right click the icon and s

11 NOTE: Network security type (‘Network Authentication’ and ‘Data encryption’) will be selected automatically based on wireless access point’s secur

12 hoc connection. Network Authentication Select the network authentication type from drop-down menu. This setting must be identical with the setti

13 NOTE: If you connected to an access point but the connection has been dropped soon, please check security settings and re-check password spell

14 * Use Windows Zero Configuration on Windows Vista: A. For Windows Vista user, you can use Windows Zero Configuration to connect to wireless acces

Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publicat

15 C. Click the access point you want to use if it‟s shown, then click „Connect‟. D. If it‟s an unnamed access point (i.e. the SSID of this wirele

16 E. If the access point is protected by encryption method, you have to input its security or passphrase here. It must match the encryption setting

17 3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the Wireless LAN Mini USB Adapter and mon

18 3.1 Utility Overview There are several parts in the utility screen. Please refer to the following table for the description. Parameter Descr

19 Windows XP Zero Configuration, check the item. Radio Off – This function is for you to turn off or turn on the radio of the adapter. If the radio

20 3.2 Available Network When you open the Configuration Utility, the system will scan all the channels to find all the access points/stations withi

21 3.3 General To check the connection status of the adapter, select “General“. This screen shows the information of Link Speed, Network Type, Encry

22 connection including None, WEP, TKIP or AES. SSID The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID

23 3.4 Profile The “Profiles List” is for you to manage the networks you connect to frequently. You are able to Add/Remove/Edit/Duplicate/Set Defaul

24 3.4.1 Configure the Profile Parameter Description Profile Name Define a recognizable profile name for you to identify the different network

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital dev

25 or Router. If this item is selected, the adapter will work in Ad Hoc mode. Channel This setting is only available for Ad Hoc mode. Select the num

26 WPA2 802.1X – Like WPA, WPA2 supports IEEE 802.1x/EAP authentication or PSK technology. It also includes a new advanced encryption mechanism using

27 computers within the network. Key Length When you select the “WEP and “PASSPHRASE“ and this function will display in the current status of the u

28 including CHAP, MSCHAP, MSCHAPv2 and PAP. PEAP specifies that an EAP-compliant authentication protocol must be used; this adaptor supports MD5, TL

29 3.5 Status This screen shows the information of manufacturer, driver version, settings of the wireless network the adapter is connecting to, link

30 3.6 Statistics You can get the real time information about the packet transmission and receiving status during wireless communication from the sc

31 3.7 Wi-Fi Protect Setup (WPS) Wi-Fi Protected Setup (WPS) is the latest wireless network technology which makes wireless network setup become ver

32 3. If you click „Yes‟, and the following message will appear on your computer, please select the SSID of wireless access point that you wish to

33 II. Push Button Config (PBC) 1. Start PBC pairing procedure at access point side (please refer to the instruction given by your access point‟s

34 2. When the connection between this wireless network card and access point is successfully established by WPS, and the information about access p

R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL o

35 3.8 Software AP Excepting become a wireless client of other wireless access points, this wireless card can act as a wireless service provider als

36 Parameter Description SSID The SSID (up to 32 printable ASCII characters) is the unique name identified in a WLAN. The ID prevents the unintenti

37 3.8.1 AP Properties Setting To configure software AP, please click “ Config” button.

38 Please note that Ad-Hoc mode is not available when network card is in AP mode. The description of major setup items are listed below: Network Nam

39 menu. ASCII / PASSPHRASE If the encryption method is WEP, check either „ASCII‟ or „PASSPHRASE‟ box and input it in the box as WEP passphrase. Key

40 3.8.2 AP Advanced If you want to setup advanced settings of software access point, select „Advanced‟ menu. If you don‟t know the meaning and af

41 3.8.3 AP Statistics You can get the real time information about the packet transmission and receiving status during wireless communication fro

42 3.8.4 ICS In this page, you can assign a network card on your computer as the path for all wireless clients to get connected to Internet. If

43 4 Troubleshooting & Glossary This chapter provides solutions to problems usually encountered during the installation and operation of the ad

44 he / she can add the MAC address of your network card to his / her access point‟s list. The network is slow / having problem when transferring lar

CONTENTS 1 INTRODUCTION ... 1 1.1 Features ...

45 4. What is Ad-hoc？ An Ad-hoc integrated wireless LAN is a group of computers, each has a Wireless LAN adapter, Connected as an independent wirele

46 12. What is DSSS？What is FHSS？And what are their differences？ Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes freq

47 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital

48 R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL

49

1 1 Introduction Thank you for purchasing this high-speed wireless network card! Excepting common wireless standards 802.11b/g, this wireless netw

2  Antenna: Chip Antenna (EW-7722UTn V2) High-Gain 3dBi Antenna (EW-7612UAn V2)  Hardware WPS button  Drivers: Windows XP/Vista/7  L

3 2 Installation Procedure Before you proceed with the installation, please notice following descriptions. Note1: The following installation was

4 EW-7612UAn V2 1. USB connector 2. Link/Activity LED (Under the case) 3. WPS Button LED Name Light Status Description Link/ Ac