Edimax Combo Print Server Installationsanleitung

FFaasstt EEtthheerrnneett CCoommbboo PPrriinntt SSeerrvveerr Quick Installation Guide Version: 1.0 (November, 2006)

7. The Setup Wizard will appear, it will guide you to configure the print server and install the printer with the print server to your computer. Plea

9. Please enter the “Password” of the Print Server you have selected to login the Print Server for more settings. The default “User Name” is “admin”;

11. Please set the network settings for the Print Server manually. By default, the network settings are as follows. IP Address: 192.168.2.2 Subnet Mas

12. The configurations are finished. Please click “Save” to apply new settings and restart the Print Server.

13. The “Install Printer Driver” page allows you to install the printer drivers and bind your printer with the Print Server to your computer. Please c

3.2.1 Normal Printer Note: Please check our web site for the compatible list of normal printers. If the print belongs to the normal printers list, you

3. Please select the driver files and the printer model you wish to install and then click “Install”.

4. After the drivers are installed completely. Your printer has been bound with the Print Server to your computer. Please click “Print Test Page” to

6. The installed printer will be added to the “Printers & Faxes” in the Windows. If you want to print documents, please select this printer.

3.2.2 GDI/Host-based Printer Note: If the printer is GDI/Host-based printer, you have to follow the procedures below to install the print server utili

3. When the Print Server Drivers are all installed, the following screen is displayed. Before you click “Connect”, please put your GDI printer’s inst

4. The system starts to connect the printer to print server and automatically search and install the GDI printer’s drivers. 5. You will see some p

6. Select “Install the software automatically (Recommended)” and click “Next”. 7. Select the correct driver and click “Next”.

8. After the driver is installed, click “Finish”. 9. After the drivers are installed completely (no more prompt message). Your GDI printer has bee

10. If you have completed the print job successfully, please click “Yes”. Or click “No” to try to install again. 11. Congratulations, the printer i

12. The following message will alert you to restart your computer before you start using the network printer. Click “OK” and restart your computer the

3.2.2.1 Using GDI Printer After restarting the computer, you will find there are two printer icons added to “Printers and Faxes” in the Windows. The “

3.3 Print Server Utilities After the installation is completed, there will be four utilities add to “Start/Programs/Print Server Utilities” folder in

MMuullttii--LLaanngguuaaggeess QQIIGG iinn DDrriivveerr CCDD ====================================================================================

Product Introduction Thank you for purchasing Edimax Combo Print Server. This Print Server allows you to share a normal USB printer or GDI/Host-based

Product Package This package contains the following components:  One Combo Print Server  One Power Adapter  One Quick Installation Guide  One GDI

1. Getting Started Before you start, you should have:  One computer with Windows 98SE/Me/NT/2000/XP for normal printer installation, if you are usi

3.2 Software Installation Procedure Before you start, you should check your computer’s operating system. This program can be run in Windows 98SE/Me/NT

3. The “Print Server Utilities - InstallShield Wizard” is displayed, click "Next". 4. Click “Next” to install the Print Server utilities

5. The system starts installing the Print Server Utilities. 6. The utilities are all installed. Please click “Finish” to go to next step.