Edimax BR-6314K Broadband Router / 4 port switch Bedienungsanleitung

b) Select “Internet Protocol (TCP/IP)” then click “Properties”, window below will appear. ‧ If you decide to use IP address from Wireless Router,

‧ If the DNS Server fields are empty, select “Use the following DNS server addresses” and enter the DNS address is provided by your ISP, then click “

‧ If you decide to use the IP address you are desired, select “Use the following IP address”. Make sure enter correct addresses in “IP Address” and “

3. Setup Broadband Router Configurations via Web Browser The Broadband Router comes with a web-based configuration utility. Users can access this

Saving as below. Click “Next” to continue. After specify the WAN connection type required by your ISP, please follow the next steps to configure DHC

Login Account: Allows you to setup a password in order to access the web-based management website. Remote Management: You can specify a Host IP addre

NTP Server (IP or Domain Name): Enter a Domain Name if it was provided by the ISP Time Zone: Select the time zone of the country you are currently

3.3.4 Configuration Use this window to restore or backup broadband router settings, such as Restore Factory Default, Backup Settings and Restore Set

3.3.6 Language Specify the language of the device menu. The two languages are supported in this router: English and Traditional Chinese. 3.3.7 Log S

3.4 WAN Specify the WAN connection mode required by your Internet Service Provider, then click "OK" Button to provide detailed configurat

July 2009 FCC Warning This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FC

DHCP: Obtain an IP address automatically from the ISP. MAC Address Clone: You can use the “Clone MAC Address” button to copy the MAC address of the E

unchecked. (c) PPPoE PPP over Ethernet is a common connection method used for xDSL. User Name and Password: Enter the User Name and Password you use

PPTP: The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private network. Server: Specify IP Address of the PPTP Serve

L2TP Mode: The Layer two Tunneling Protocol (L2TP) is a method for implementing virtual private network. Server: Specify IP Address of the L2TP Serve

User Name: Enter the User Name is provided by your ISP. This field is case-sensitive. Password: Enter the Password is provided by your ISP. This fiel

3.5 LAN 3.5.1 LAN Settings Configure the gateway address of the Broadband Router. To dynamically assign the IP address for client PCs, enable the DHCP

DHCP Client List: This page shows all DHCP clients (LAN PCs) currently connected to your network. The “DHCP Client List” displays the IP address and

3.6 NAT 3.6.1 Virtual Server If you configure the Broadband Router as a virtual server, remote users accessing services such as Web or FTP at your loc

applications that require multiple connections,-specify the port normally associated with an application in the "Trigger Port" field, select

Enabled: Enable the Port Mapping function. Comment: The description of this setting. Server IP: Enter the NAT server IP address. Mapping Ports: Enter

Contents _____ 1. Introduction ...

3.6.4 Passthrough Allow the broadband router correctly pass though the NAT gateway. [VPN] PPTP Passthrough: PPTP is a protocol that allows corporati

Enable: Enable/disable DMZ. (Default: Disable) Public IP Address: The IP address of the WAN port or any other Public IP addresses given to you by you

3.7.2 Client Filtering You can filter Internet access for local clients based on IP addresses, application types, (i.e., HTTP port), and time of day

3.7.4 MAC Filtering The MAC address filer let user to allow or block certain client PCs accessing the Internet based on MAC address. MAC Address Co

3.8 Routing 3.8.1 Routing Table The routing table displays the current routing information in system. 3.8.2 Static Routing A static route is a pre-d

3.9 Misc 3.9.1 UPnP UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment attached to your LAN. UPnP is by suppo

3.10 Status 3.10.1 Status This status page displays the router’s current status and configuration. All information is read-only. 3.10.2 Log The lo

3.9 Misc ... 35 3.9.1 UPnP .

1. Introduction ______ Congratulations on purchasing the Broadband Router. This Broadband Router, is a high qualit

● Multi Segment LAN Support: This feature is enabled through Broadband Router’s RIP (Routing Information Protocol) and build-in static routing table.

WAN On (Steady Amber) WAN port is successfully connected Flashing Data is being sent or received. Back Panel Connectors Button/port Des

User needs to configure TCP/IP network settings, Internet access configuration for each system within the Broadband Router’s LAN network. By default,

‧ If you decide to use IP address from Wireless Router, select “Obtain an IP address automatically”. ‧ If you decide to use the IP address you are