Edimax i-Watcher i-Watcher Pan/Tilt Internet IP Camera Bedienungsanleitung

1

10 1.2 Basic Introduction Thank you for purchasing this Internet IP camera! This IP camera is an ideal product for all kinds of video-surveillance

100 3.8 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click „Scan‟ button

101 3.9 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the sco

102 3.10 PTZ For cameras that support pan - tilt function, you can change the position that camera points to, to see different places that fall in

103 3.11 Snapshot You can take a snapshot of selected camera and save it to „Snapshot‟ sub-folder of pre-defined data directory. Clic

104 3.13 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the

105 Chapter IV: Trouble Shooting If the IP camera is not working properly, before you contact the dealer of purchase for help, please check the tro

106 c. If you‟re connecting this camera from Internet, it could be caused by a slow Internet connection, and it‟s not a problem caused by camera. Ho

107 I set the IP camera to send image by Email or FTP, but nothing is received a. If the image is send by Email, please make sure it‟s not blocked b

108 Specification Max Resolution: 1280 x 1024 pixels Sensor: 1.3 mega pixels 1/4" color CMOS sensor Gain control: Automatic Exposure: Automati

109

11 1.3 Product Highlights No pre-loaded software required - all you need is a browser like Internet Explorer 6 (and above, with plugin installed)

12 1.4 Familiar with Key Components LAN LED: Indicates LAN activity WLAN LED: Indicates Wireless LAN activity Power LE

13 Reset Button: Press and hold for 5 seconds to reset the camera settings to factory default value. Power Jack: Connect to power adapter f

14 Tripod Connector: Connects to any standard tripod / camera wall holder. MAC Address Label: Shows the MAC address of this IP came

15 1.5 Descriptions for LED Indicators LED Name Status Description LAN Off Network cable is disconnected On Network cable is connected Flash Transf

16 1.6 Camera Installation Please follow the following instructions to set your IP camera up. Unpack the product package and check if anything‟s m

17 1.7 Locate the IP Address of this IP Camera Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to thi

18 Double-click „Network Connections‟ icon. Right-click „Local Area Connection‟, and click „Properties‟. Select „Internet Protocol (TCP/IP)‟,

19

2 ErP Announcement Product: Internet Camera (IP CAM) Purpose: 24 hours surveillance and transfer the picture for safety and health of intended use.

20 In „IP address‟ field, please fill in any IP address begins with „192.168.2‟, and ends with a value greater than 2 and less than 254 (You can use

21 1.8 Log Onto Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type

22 After logged on, you should see the following messages at the top of Internet Explorer: This IP camera requires a special ActiveX control (A.

23 You should be able to see the image from camera now: Note: If you see one of these messages (or both): Your co

24 Chapter II: Using Web Management Interface 2.1 Camera Settings The first menu after you logged onto web management interface is „Camera‟, and t

25 The descriptions of every setting in this menu will be given below: Item Description Video Format Specifies video encoding format. You can choos

26 Click „Enable‟ to enable digital zoom function, then you can drag the slide bar to adjust zoom ratio. You can also use your mouse to drag the z

27 2.1.1 Mute Audio IC-3010(Wg) is able to transmit all sound received by built-in microphone to your computer by default. If you don‟t want to hea

28 2.1.2 About This function will provide you with the version number of current IP camera plugin, which is useful when you need online support. T

29 2.2 LAN Settings All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to c

3 Table of Contents Chapter I: Familiar with your Internet IP Camera ... 8 1.1 Package Contents ...

30 The descriptions of every setting in this menu will be given below: Item Description Network Type This camera can obtain the IP address from DHC

31 2.2.2 RTSP Before using RTSP player to view video image from camera, you will need to configure the RTSP settings in this menu. Item

32 2.2.3 PPPoE If the ISP requires you to connect to the Internet by PPPoE, you can specify PPPoE username and password here. The descript

33 2.2.4 Dynamic DNS If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you‟re using when you access the Internet

34 2.2.4 UPnP When UPnP function is activated, all UPnP-compatible computers / network devices will be able to discover this IP camera automaticall

35 Click the message to open „My Network Places‟, and you‟ll see the IP camera: You can double-click the icon to launch Internet E

36 2.2.5 LoginFree You can specify a filename here, and everyone who know this filename can gain access to the picture captured by the IP camera wi

37 2.3 Audio/Video You can specify the video and audio parameters of this IP camera here.

38 2.3.1 Dual Mode This IP camera supports two video encoding formats: MPEG4 and MJPEG. You can select the encoding format from one of them.

39 2.3.2 MPEG4 If you selected „MPEG4‟ as the video encoding format of this IP camera, you can specify the parameters of MPEG4 video encoder here.

4 2.7.3 Date / Time Setting ... 565 2.7.4 Utilities ...

40 2.3.3 MJPEG If you selected „MJPEG‟ as the video encoding format of this IP camera, you can specify the parameters of MPEG4 video encoder here.

41 2.3.4 Audio This IP camera supports audio function, that is, when external speaker is connected to this IP camera, you can talk to the people in

42 2.4 Email & FTP This IP camera is capable to send an Email or perform FTP upload with captured image, when a motion is detected. This is ver

43 2.4.1 Email Settings These settings are used to send the captured picture via Email: The descriptions of every setting in this menu w

44 network administrator or ISP. User Name Please input the user name of SMTP server here, if your SMTP server requires the use of authentication. P

45 2.4.2 FTP Settings These settings are used to send the captured picture by FTP: The descriptions of every setting in this menu will b

46 to use passive mode. Click „Apply‟ to save settings and make the new settings take effect. After that, you can click „Upload a test file‟ to

47 2.5 Motion Detection Motion detection function makes this IP camera become your non-stop guard. You don‟t have to waste all the time monitoring

48 is happened between time interval; if the time interval is too short, you may receive too much unnecessary images, and consumes too much disk Pre

49 2.5.2 Motion Region You can define the motion detection region within the image that camera captures, so this camera will ignore motions which a

5 Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

50 To change the motion detection region, you can „resize‟ and „reposition‟ it: Move the mouse cursor to the eight dots located at the borde

51 2.6 Schedule In this menu, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-define

52 function. You have to configure e-mail settings in „email & FTP‟ menu first, so this function will take effect. Time Interval This option all

53 2.6.2 You can use this menu to setup Schedule Snapshot settings: The descriptions of every setting in this menu will be given below: Item

54 Enable E-Mail Schedule Select „Enable‟ to send the recorded video to the appointed e-mail address, or select‟ Disable‟ to disable this function.

55 2.7 System The system menu allows you to set some system-specific parameters, like password and time setting. You can also upgrade the firmware

56 2.7.2 On-Screen Display This setting allows you to show the name of the IP camera, date and time on the real-time image. Item Descript

57 2.7.3 Date / Time Setting This setting allows you to change the date and time of the real time clock in this IP camera. You can set the time man

58 2.7.4 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off. The des

59 You can click this button again to switch LED lights on again.

6 Federal Communication Commission Interference Statement FCC Part 68 This equipment complies with Part 68 of the FCC Rules. On the bottom of this e

60 2.8 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information.

61 2.9 Users If you wish to allow other people to view the image captured by this camera, but don‟t want to allow them to modify system settings, y

62 The descriptions of every setting in this menu will be given below: Item Description User (1 - 4) Select „Enable‟ to enable

63 2.10 Log All activities of this IP camera will be logged, and you and enter „Log‟ menu to view these logs. You can access this menu by clicking

64 Chapter III: Windows-Based Utility 3.1 Install Windows-based Utility Follow the simple steps below to run the Install Wizard to guide you quic

65 The system will start the installation procedures. Click “Next” to continue installation. If you wish to install the software prog

66 Click “Install” to start installing the program. The system will install the program automatically.

67 Click “Finish” to complete „‟Administrator Utility‟‟ installation. ”Administrator Utility“ will run automatically after installati

68 Please enter the default password “1234” and click “OK” to login to the IP setup page. Internet Camera is working through the network

69 3.2 Using the Administrator Utility The Administrator Utility allows users to search and setup the cameras located within the Intranet or on the

7 FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. The

70 3.2.1 General Setting Information of Camera Camera Information It displays all information of the selected camera. The inform

71 3.2.2 Configure Camera When you click the “Configure Camera”, a screen will pop up for you to enter the “Administrator Name” and “Password”. The

72 3.2.3 LAN Setting LAN Setting IP Address Enter an unused IP Address within the IP address range used on your LAN. If the IP

73 Web Port This Camera support web connection, the default web port is 80. You could give the port name from 1-65536. Since the web server may use

74 3.2.4 Security Security Camera Name New Password Confirm Password The default camera name is “IC1500WG”. It is recommen

75 3.3 Installing IP Camera Surveillance Software The IP camera surveillance software provides various functions like video recording, after this s

76 3. If you need installation program to create a desktop icon or a quick launch icon for you, click all items you need here, than click „Next‟ to

77 5. The installing procedure will take some time, please be patient. 6. When you see this window, it means the software installing procedure

78 3.4 Using IP Camera Surveillance Software You can click „IPCam Surveillance Software‟ icon from desktop, quick launch bar, or start menu to star

79 area Language Select a language from this dropdown menu to change display language. Display layout Change camera image display layout (Click a l

8 (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth St

80 Video displaying area Displays the image of all cameras by the display layout you selected.

81 3.5 Configure IP Camera Surveillance Software 3.5.1 Configure Cameras Before you use this IP camera surveillance software, you must configure t

82 3.5.1.1 „Camera‟ Tab In this tab you can configure all cameras you wish to connect. Up to 16 cameras can be connected simultaneously:

83 Video Format** Select the video encoding format of this camera (MJPEG or MPEG4). Reset Clear all fields in „Camera Configuration‟ section. OK Sav

84 3.5.1.2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by

85 Here are the descriptions of all setting items: Item Description Channel Select the channel number you wish to set. One Time Schedules You can s

86 Click „OK‟ to save changes. Edit You can modify a scheduled recording item. Select a schedule in „One Time Schedules‟ list, and click „Edit‟ butt

87 3.5.1.3 Audio For cameras that support audio, you can use this tab to decide if you wish to hear the audio captured by selected camera.

88 3.5.1.4 Motion Record With this function activated, only motions captured by the camera will be recorded, so you don‟t have to waste hard disk s

89 3.5.2 General Settings You can set system-wide settings of this IP camera surveillance software in this menu. 3.5.2.1 „General‟ Tab All genera

9 Chapter I: Familiar with your Internet IP Camera 1.1 Package Contents Thank you for purchasing this IP camera! Before you start to use this IP ca

90 Disable: Do not overwrite recorded video files. Enable: Overwrite recorded video files. OK Save settings in this tab. Cancel Discard all settings

91 3.5.2.2 „E-Mail Setting‟ Tab If you want to use motion detection function and wish to get an email that contains the image captured by the camer

92 click „Edit‟ to edit the email address. Delete Delete selected email address. Sender E-Mail Address Specify the email address of email sender. SM

93 3.5.2.3 Security If you don‟t want other people to access this IP camera surveillance software, you can set a password to protect it. You‟ll ne

94 Disable Password authentication is not required when this software starts. Password Input the password you wish to use here. Confirm Password Inp

95 3.5.2.4 About This tab shows the version number of the IP camera surveillance software you‟re using.

96 3.6 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of

97 Layout style 3: 6 Cameras Displays the video of up to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 camera

98 Layout style 8: 16 Cameras Displays the video of up to 16 cameras.

99 3.7 Full-Screen Modes If you want to use all available spaces on your monitor to display surveillance image, you can click „Full Screen‟ button