Edimax PS-3207UWg Bedienungsanleitung PDF herunterladen (Seite 89)

Upgrade Firmware: You can use this “Upgrade

Firmware” tool to update the newest firmware of the print

server. Click “ ” button and select the correct firmware in

your PC. After selecting the firmware file, click the

“Upgrade” button to finish the firmware update process. If

you want to reset the Print Server to default factory settings,

please click “Load Default”.

Wireless Function: You can select “Enable” or

“Disable” to manually enable or disable the wireless

function. If you manually enable wireless function, the

print server’s wireless LAN will be always enabled and

Ethernet will be always disabled. If you manually disable

the wireless function, the print server’s wireless LAN will

be always disabled and Ethernet will be always enabled.

You also can select “Auto” to let the print server

automatically decide to enable or disable the wireless

function. The print server only can work in ether Ethernet

or wireless LAN mode. It cannot work in both Ethernet and

wireless LAN mode at the same time. When the print server

starts up, it will auto-detect if the LAN port is connected to

an active network by an Ethernet cable. If the print server

is connected to an active network by Ethernet cable when

starting up, the print server will run in Ethernet mode. If

the print server is not connected to an active network by

Ethernet cable when starting up, the print server will run in

wireless LAN mode. The print server default is in “Auto”

mode.

Domain Country: The wireless channels are different

from country to country. Generally, the channels are from 1

to 11 in USA and from 1 to 13 in Europe. The Domain

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 157 158

Keine Kommentare

Edimax PS-3207UWg Bedienungsanleitung Seite 89