Edimax PT-31E Installationsanleitung PDF herunterladen (Seite 12)

Method 2: PIN CODE SETTING

Step 1: Power on the wireless AP and the wireless network camera. Wait for 1

minute for both devices to be up and running.

Step 2: Open a web browser and login to the wireless server. Go to the

wireless/WPS setting page.

Step 3: Open web browser and login to the wireless network camera. Go to

the network/Wireless setting page and locate Wi-Fi Protected Setup (WPS)

item.

Step 4: Please enter the corresponding pin code of each device, on both pages

in the field “Configure via Pin Code” – as shown below. Then push the “Start

PIN” button.

Step 5: Wait for 30 seconds. When the network LED of the camera is blinking,

a WPS connection has been successfully established

Step 6: If you have more than 1 camera, repeat steps 2 - 5 for each additional

camera.

IP Camera Page

AP Setting Page

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Edimax PT-31E Installationsanleitung Seite 12