Edimax EW-7711UMn Bedienungsanleitung PDF herunterladen (Seite 11)

4. Hardware Installation

1. Unpack your Edimax IP Camera from its packaging and ensure

that all the items listed in Chapter 1 are there.

2. Connect the Edimax IP Camera to your network by attaching a

network cable from your switch or router to the LAN port on the

IP Camera.

3. Connect the power adapter to the IP Camera and plug the

adapter into a power outlet. When the IP Camera is ready, the

Power LED will light up.

Note: It is highly recommended to use only the power adapter

shipped with the IP Camera. Do NOT use any other power adapter

and avoid possible damage to your new device.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Edimax EW-7711UMn Bedienungsanleitung Seite 11