Edimax N300 Bedienungsanleitung PDF herunterladen (Seite 28)

Item Description

Enable WPS You can enable or disable the WPS feature.

Disabling WPS here will also disable the

hardware WPS button.

WPS is enabled by default.

WPS Status Shows the security setting status of WPS. If the

Wi-Fi extender’s security has been configured,

whether manually or automatically through the

WPS button, the WPS status entry will be

‘Configured’.

Device PIN Code This is an 8-digit number for WPS PIN-style

configuration. When another WPS-compatible

device wishes to connect to this Wi-Fi extender

and supports PIN type WPS, input this number

into the wireless device to establish a connection.

SSID Shows the SSID of this Wi-Fi extender.

Authentication

Mode

Shows the authentication mode of this Wi-Fi

extender.

Passphrase Key The key is shown in asterisks (*) to indicate

wireless security is properly set.

Config Mode There are ‘Registrar’ and ‘Enrollee’ modes for the

WPS connection. When ‘Registrar’ is enabled,

the wireless clients will follow the extender’s

wireless settings for WPS connection. When

‘Enrollee’ mode is enabled, the extender will

follow the wireless settings of the wireless router

for WPS connection.

Configure via Push

Button

Click ‘Start PBC’ to start Push-Button style WPS

setup procedures. This Wi-Fi extender will wait

for WPS requests from another wireless device

for 2 minutes.

The ‘WPS’ LED on the Wi-Fi extender will blink

for 2 minutes while this Wi-Fi extender waits for

incoming WPS requests.

Input Client PIN

Code

Please input the PIN code of the wireless client

you wish to connect to, and click the ‘Send PIN’

button.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

Edimax N300 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte Edimax N300