Edimax EdiView Bedienungsanleitung PDF herunterladen (Seite 11)

II-2. Camera

Follow the instructions below to ensure your camera is properly connected

and ready for setup. You can setup your camera using Wi-Fi or using an

Ethernet cable.

1. For Ethernet cable setup, use an Ethernet cable to

connect the network camera’s LAN port to a

router/switch/access point’s LAN port.

2. Connect the power adapter to the network camera’s power port and to a

power supply, as shown to the right.

3. Wait a moment for the camera to power on. The

camera will make a sound and the green power LED

will flash slowly when it’s ready. Please refer to III.

Camera Setup to setup your network camera.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 132 133

Keine Kommentare

Edimax EdiView Bedienungsanleitung Seite 11