Edimax EdiView Bedienungsanleitung PDF herunterladen (Seite 63)

63

Motion Detection

Enable or disable the motion detection

function of your network camera.

Detection Type

Select type of motion detection:

Video motion detection: This is software-

based motion detection which is highly

sensitive to any motion & lighting changes.

Human motion detection: This is infrared

(PIR) motion sensor detection, which detects

changes in infrared radiation caused by heat

e.g. a person entering a room.

Interval Time To

Detect

After motion is detected, the network camera

will not detect motion again for this length of

time. For example, using an “Interval Time To

Detect” of 20 seconds means that after

motion is detected, the camera will not

detect any further motion for 20 seconds.

Then after 20 seconds, the camera will detect

motion again.

Upload Event File to

FTP

A video recording of a detected event can be

sent to a designated FTP server. Select

“Enable” or “Disable” for this function. When

enabled, you need to configure the FTP server

information on the “FTP” page of the “Events

 Notification” menu.

Send Event File to

Email

A video recording of a detected event can be

sent to a designated email recipient. Select

“Enable” or “Disable” for this function. When

enabled, you need to configure the SMTP

server information on the “SMTP” page of the

“Events  Notification” menu.

Video Recording

Time

Specify the length of time for the email or FTP

video recording here.

Save Event Files to

NAS or SD

Enable or disable the camera’s function to

save video files to NAS or MicroSD card.

When enabled, you need to configure the

settings in the “Storage Settings” menu.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 132 133

Kommentare zu diesen Handbüchern

Keine Kommentare